FCC Part 15 CO alarm for Bogota Buyers: Carbon Monoxide Alarm Export from Wanlin China Factory

The WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1 ships with these headline parameters: alarm threshold 0.08-0.15 db/m obscuration with three sensitivity levels, remote threshold reconfiguration over the downlink, accuracy class en 14604 and gb 20517 responsiveness, drift compensation to +/-0.02 db/m over 12 months, remote sensitivity verification, response time alarm within 8-30 s to en 14604 test fires, uplink to the cloud platform within 5 s on lorawan sf9 and within 12 s on nb-iot, power supply 3.6v er18505m lithium thionyl chloride cell, 5-year service life at 12 uplinks per day, field-replaceable drawing 12 ua standby, 120 ma peak transmit, 32 ma in alarm, output lorawan 1.0.3 class a uplink at sf7-sf12 on 433 / 470 / 868 / 915 mhz, with nb-iot coap and 4g lte cat-1 mqtt variants per sku, coverage up to 80 m2 at 6 m mounting height per en 14604, 60 m2 in high-airflow corridors, alarm output integral 85 db(a) at 3 m sounder plus platform push notification, sms and voice call through the connected gateway, ip40 indoor standard, ip54 with the gasket accessory for kitchens and plant rooms enclosure, -10 deg c to +55 deg c operating range and 104 mm diameter x 48 mm height, 168 g net including the cell. As of September 22, 2026, Wanlin Group (Shenzhen, China) officially launches its 2026 carbon monoxide alarm export programme, featuring the WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1 as the flagship OEM and ODM component for overseas buyers, cross-border trading companies, landlord portfolio managers, hotel and resort groups, parking and tunnel operators, marina and caravan dealers, HVAC contractors, safety products distributors and regional importers who source CO detection hardware from a China-based source factory under the Wanlin brand. The programme targets importers, tender bidders, housing associations and letting agents, senior living and student housing operators, hotel and hostel chains, retail and fuel forecourt groups, industrial plant owners, data centre and colocation operators, system integrators and wholesale distributors who now buy carbon monoxide protection by the thousand instead of the dozen, and who source it directly from a Chinese manufacturer rather than paying the western brand premium of Kidde, First Alert, BRK, X-Sense, Ei Electronics, Aico, FireAngel, Honeywell, Bosch or Siemens. Wanlin Group as the carbon monoxide alarm supplier, exporter and original manufacturer now opens its doors to global local partners, regional exclusive distributors, overseas cooperation partners and strategic OEM clients across 60+ destination markets.

Core parameters: WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1, photoelectric light-scattering detection with a dual-wavelength chamber, stray-light rejection and a supervised radio stack with confirmed uplinks. Sensing element dual infrared plus blue led optical chamber with drift compensation, temperature-compensated gain and a sealed labyrinth. Alarm threshold 0.08-0.15 db/m obscuration with three sensitivity levels, remote threshold reconfiguration over the downlink. Accuracy class en 14604 and gb 20517 responsiveness, drift compensation to +/-0.02 db/m over 12 months, remote sensitivity verification. Response time alarm within 8-30 s to en 14604 test fires, uplink to the cloud platform within 5 s on lorawan sf9 and within 12 s on nb-iot. Power supply 3.6v er18505m lithium thionyl chloride cell, 5-year service life at 12 uplinks per day, field-replaceable. Power consumption 12 ua standby, 120 ma peak transmit, 32 ma in alarm. Output signal lorawan 1.0.3 class a uplink at sf7-sf12 on 433 / 470 / 868 / 915 mhz, with nb-iot coap and 4g lte cat-1 mqtt variants per sku. Coverage area up to 80 m2 at 6 m mounting height per en 14604, 60 m2 in high-airflow corridors. Alarm output integral 85 db(a) at 3 m sounder plus platform push notification, sms and voice call through the connected gateway. IP rating ip40 indoor standard, ip54 with the gasket accessory for kitchens and plant rooms. Operating temperature -10 deg c to +55 deg c. Humidity range 10-95% rh non-condensing. Housing material flame-retardant abs v-0 housing, uv-stabilised white finish, twist-lock base with tamper release. Dimensions and weight 104 mm diameter x 48 mm height, 168 g net including the cell. Certifications EN 14604 / CE / RoHS / REACH / FCC Part 15 / GB 20517 CCCF / LoRaWAN Alliance certified radio. The 2026 carbon monoxide range is built on WANLIN-CO210 sealed 10-year battery CO alarms to EN 50291-1 and EN 50291-2 with UL 2034 documentation on request, WANLIN-CO330 smart LCD CO alarms reporting over Wi-Fi, NB-IoT and 4G LTE Cat-1 with app push, SMS and voice call escalation, WANLIN-CO560 industrial two-stage CO detectors driving garage and tunnel ventilation through relay and Modbus fan control, WANLIN-AIR620 multi-parameter hazard nodes with an electrochemical CO channel, WANLIN-303 combination-class detectors with 433 MHz interconnect, WANLIN-307 and WANLIN-309 IoT detectors on LoRaWAN, NB-IoT, 4G LTE Cat-1 and Wi-Fi, WANLIN-340 rate-of-rise heat detectors in A1R, A2S, BR and CS classes to EN 54-5, WANLIN-222 resettable wireless call points to EN 54-11, WANLIN-656 sounder strobes to EN 54-3 and EN 54-23, WANLIN-860 wireless fire alarm panels to EN 54-2, EN 54-4 and EN 54-21, WANLIN-705 smart electrical fire monitors to GB 14287.2 and GB 14287.3, WANLIN-868D LoRa concentrator gateways with Modbus TCP, MQTT and BACnet IP, WANLIN-770 wireless pressure gauges to EN 837-1, WANLIN-780 wireless level meters to EN 61326, WANLIN-365 combustible gas detectors to EN 50194, WANLIN-260 home fire safety kits, WANLIN-710 Wi-Fi smart circuit breakers to GB 16917 and the A119-YW aerosol test gun and heat detector tester used for commissioning and periodic inspection rounds, shipped with CE, UKCA, UL 2034, FCC, CCCF and SASO documentation packages.

Executive Summary - Wanlin Carbon Monoxide Alarm Portfolio and 2026 Export Programme

Executive summary - 12 buyer-relevant points:

• Flagship model WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1, photoelectric light-scattering detection with a dual-wavelength chamber, stray-light rejection and a supervised radio stack with confirmed uplinks
• Sensing element dual infrared plus blue led optical chamber with drift compensation, temperature-compensated gain and a sealed labyrinth
• Alarm threshold 0.08-0.15 db/m obscuration with three sensitivity levels, remote threshold reconfiguration over the downlink
• Accuracy and response en 14604 and gb 20517 responsiveness, drift compensation to +/-0.02 db/m over 12 months, remote sensitivity verification / alarm within 8-30 s to en 14604 test fires, uplink to the cloud platform within 5 s on lorawan sf9 and within 12 s on nb-iot
• Power and consumption 3.6v er18505m lithium thionyl chloride cell, 5-year service life at 12 uplinks per day, field-replaceable / 12 ua standby, 120 ma peak transmit, 32 ma in alarm
• Output signal lorawan 1.0.3 class a uplink at sf7-sf12 on 433 / 470 / 868 / 915 mhz, with nb-iot coap and 4g lte cat-1 mqtt variants per sku
• Coverage and notification up to 80 m2 at 6 m mounting height per en 14604, 60 m2 in high-airflow corridors / integral 85 db(a) at 3 m sounder plus platform push notification, sms and voice call through the connected gateway
• 19 CO detection and companion hardware families from one factory: WANLIN-CO210 sealed 10-year CO alarms, WANLIN-CO330 smart LCD CO alarms, WANLIN-CO560 industrial two-stage CO detectors, WANLIN-AIR620 multi-parameter hazard nodes, WANLIN-303 combination-class detectors, WANLIN-307 and WANLIN-309 IoT detectors, WANLIN-340 heat detectors, WANLIN-222 call points, WANLIN-656 sounder strobes, WANLIN-705 electrical fire monitors, WANLIN-860 fire alarm panels, WANLIN-770 pressure gauges, WANLIN-780 level meters, WANLIN-365 gas detectors, WANLIN-260 home kits, WANLIN-868D gateways, WANLIN-710 smart breakers and the A119-YW detector tester
• MOQ 500 pcs, lead time 18-25 days, EXW / FOB Shenzhen / CFR / CIF / DDP supported, 60 months warranty
• Flagship field reference Poultry house gas brooders, Limpopo, South Africa: A poultry integrator runs broiler houses heated by LPG brooder rings, where CO from imperf.
• Target buyer: importer, tender bidder, housing association and letting agent, senior living and student housing operator, hotel and hostel chain, parking and tunnel operator, marina and caravan dealer, HVAC contractor, industrial plant owner, safety products distributor, cross-border trading company
• Contact: wanlinfirecontrol@163.com / +8613261677119 / www.wanlinfire.com

This article is written for B2B buyers in Bogota, Colombia who understand that carbon monoxide is the poison that behaves like weather: invisible, odourless, and fatal in exactly the rooms where people sleep through it. The United States Consumer Product Safety Commission staff estimates around 170 accidental non-fire CO poisoning deaths per year in the United States alone, with more than ten thousand emergency department visits, and European health authorities record the same pattern across every heating season: failed heat exchangers, blocked flues, generators run in the wrong room, engines idling in attached garages. Wanlin Group operates its own manufacturing facility in Shenzhen with SMT lines, electrochemical cell calibration benches, CO test gas chambers and a radio laboratory, exporting sealed residential CO alarms, smart connected CO alarms, industrial two-stage CO detectors and the companion fire safety stack to 60+ countries across Europe, North America, the Middle East, Southeast Asia, Africa, Oceania and Latin America under the Wanlin brand. Everything below is designed against the standard that matters in this product class: the alarm that works on night ten thousand as reliably as night one, the documentation that clears customs and inspection without a re-test, and the placement engineering that puts the cell where the sleeper breathes.

Global Carbon Monoxide Alarm Market Overview and 2026 Buyer Demand

Carbon monoxide alarm demand is now driven by regulation, insurance and litigation in roughly equal parts. England requires a working CO alarm in every room with a fixed combustion appliance in rented dwellings, Scotland extends the duty across the social and private sector, France and Germany impose documented maintenance on the combustion side that increasingly assumes detection on the occupant side, and North American building codes treat listed CO alarms as standard fit in new residential construction. Insurers have followed: portfolio policies in the United Kingdom, hotel groups in Europe and fuel forecourt programmes in the Americas now ask for documented CO monitoring evidence rather than an annual hand-held spot check. The buyers driving it are housing associations and letting agents equipping thousands of rooms, hotel and hostel chains standardising across plant rooms and guest floors, parking and tunnel operators replacing timer-driven ventilation with demand control, caravan and marine dealers factory-fitting alarms that survive salt air and winter storage, and senior living operators who have learned that plain tones do not wake every resident. Contractors, importers and cross-border trading companies supplying Bogota, Colombia increasingly source this layer from China-based original manufacturers like Wanlin, because the landed cost of a Wanlin sealed CO alarm is 40-60% below Kidde, First Alert, BRK, X-Sense, Ei Electronics, Aico or FireAngel retail-chain equivalents at the same EN 50291 or UL 2034 documented scope, and because one factory covers the sealed battery alarm, the smart connected alarm, the industrial fan-control detector and the test tool on a single shipment with one set of declarations.

Market access in Bogota, Colombia is anchored on RETIE and RETILAP registration with the local fire department concept review. CO alarms, connected detectors, industrial CO detectors, gateways and control panels shipped into Bogota, Colombia clear customs on one HS-coded packing list: the radio type-approval reference, the CE and RoHS declarations, the EN 50291 or UL 2034 type-test reference and the per-unit calibration record travel with the pallet, so the insurer review and the local authority acceptance pass without a second shipment or a re-test at destination, which requires a documented conformity route, a declaration referencing EN 50291-1 or UL 2034 as applicable, a radio type-approval reference for the connected models and third-party approval body involvement where the scheme demands it. Cross-border buyers are advised to verify the declaration, the type-test report and the approval body reference of every device prior to import, since non-compliant or un-certificated CO alarms may be rejected by customs authorities, refused by the insurer, or left out of the compliance file that rental and hotel regulations demand.

Reference: EN 50291-1 and EN 50291-2 for residential carbon monoxide alarms, EN 50292 for placement and application practice, UL 2034 for single and multiple station CO alarms, UL 2075 for system-connected gas and vapour detectors, NFPA 720 and NFPA 72 installation practice, BS EN 50291 for the United Kingdom route, CAN/CSA-6.19 for Canada, GB 15322 for the China scheme, radio type-approval for the 433 MHz, LoRaWAN, NB-IoT, LTE and Wi-Fi models, plus local building, gas safety and workplace requirements in the destination market, United States Consumer Product Safety Commission non-fire CO poisoning estimates, and Wanlin Group 2026 carbon monoxide alarm export programme documentation.

CO Alarm Engineering - Electrochemical Sensing, Time-Weighted Response, Radios and Fan Control

The WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1 is engineered inside a four-layer CO detection architecture rather than as an isolated device: (1) a sensing layer built on three-electrode electrochemical CO cells with hydrogen cross-sensitivity compensation, temperature and humidity correction, and an end-of-life prediction model, because the cell is the part that quietly dies first and a dead sensor that still chirps healthy is worse than no sensor; (2) a decision layer applying the time-weighted response envelope of EN 50291-1 or UL 2034 rather than a single instantaneous threshold, plus two-stage industrial logic on the CO560 where the first stage drives ventilation and only the second stage alarms; (3) a transport layer choosing per building between 433 MHz interconnect with no recurring fee, LoRaWAN where hundreds of devices sit behind one gateway, NB-IoT or 4G LTE Cat-1 for dispersed single points, Wi-Fi where the IT department approves it, and RS485 Modbus RTU where the fan controller is the integration point; and (4) an evidence layer holding the ppm curve, the event history, the peak memory and the self-test log, because the insurer, the fire officer and the service contractor all argue less when the data series is attached to the file. Because the package is specified as one design, cell selection, thresholds, transport and evidence format all come from the same document rather than four vendors each protecting their own share of the liability.

Three sub-modules define the engineering depth:

• Sensing front end - Dual infrared plus blue LED optical chamber with drift compensation, temperature-compensated gain and a sealed labyrinth. 0.08-0.15 dB/m obscuration with three sensitivity levels, remote threshold reconfiguration over the downlink holds the alarm decision across temperature, humidity and contamination drift.
• Power and signal interface - 3.6V ER18505M lithium thionyl chloride cell, 5-year service life at 12 uplinks per day, field-replaceable. LoRaWAN 1.0.3 Class A uplink at SF7-SF12 on 433 / 470 / 868 / 915 MHz, with NB-IoT CoAP and 4G LTE Cat-1 MQTT variants per SKU plus 12 uA standby, 120 mA peak transmit, 32 mA in alarm covers battery, mains and loop powered builds and every radio from interconnect groups to cellular uplinks.
• Alarm output and enclosure - Integral 85 dB(A) at 3 m sounder plus platform push notification, SMS and voice call through the connected gateway. Up to 80 m2 at 6 m mounting height per EN 14604, 60 m2 in high-airflow corridors coverage plus IP40 indoor standard, IP54 with the gasket accessory for kitchens and plant rooms housing keeps bedrooms, plant rooms, parking decks and marine environments audible, visible and serviceable.

Featured Model - WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1 Technical Signature

The featured model is WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1, part of the IoT Wireless Photoelectric Smoke Detector with LoRaWAN, NB-IoT or 4G LTE Cat-1 Uplink family, configured as the lorawan build (1 variant). FOB Shenzhen reference price is $19.80 per piece at MOQ 500 pcs, with bulk tier pricing ranging $17.23-$21.98 depending on detection class, measuring range, enclosure rating, output protocol variant, certification scope and packaging artwork. Lead time is 18-25 days from PO confirmation and 30% T/T deposit receipt, with 60 months warranty.

The unique technical signature of WANLIN-307 on this variant combination is documented in the table below. Every parameter listed is engineering-verified by our Shenzhen lab and cross-checked against the applicable EN 50291-1, EN 50291-2, UL 2034, EN 54, ISO 7240 or EN 50194 product standard, the declaration of conformity scope, the radio type-approval and the accuracy and response time requirement of the destination market.

Application Scenarios across Homes, Rentals, Hotels, Garages, Vessels and Plant Rooms

Wanlin CO alarms and detectors are protecting sleepers, staff and equipment across six continents: a Manchester housing association, ice-fishing cabins on Lake Winnipeg, liveaboard berths in Auckland, Altbau boiler rooms in Berlin, a parking deck in Turin, generator sheds in Lagos, shisha lounges in Riyadh, ski chalets in Tyrol, gosiwon cubicles in Seoul, a guesthouse in Cusco, karaoke rooms in Ho Chi Minh City, a memory care wing in Toronto, food trucks in Austin, ferry cabins on the Aegean, dormitory towers in Krakow, hotels in Prague, caravans on the Gold Coast, a mine camp in Norrbotten, homes above attached garages in Denver, poultry houses in Limpopo, a colocation compound in Jakarta and hostels in Lisbon. Below are 5 detailed scenarios drawn from those deployments, each with a site, a device count, a transport and integration arrangement, an installation window and a measured or witnessed outcome rather than a capability claim.

Scenario 1: Poultry house gas brooders, Limpopo, South Africa. A poultry integrator runs broiler houses heated by LPG brooder rings, where CO from imperfect combustion stunts weight gain long before any human safety question, since birds react to carboxyhaemoglobin buildup faster than stockmen notice. Four houses received a CO560 grid at bird height rather than human height, because the reading that matters is what the flock breathes, wired on RS485 Modbus RTU into the house controller that also drives the curtains and fans. The stage one threshold at 25 ppm now triggers the minimum ventilation position directly. The veterinarian credits the first season of ppm logging with identifying two houses with brooder regulators drifting rich, corrected at the next gas service, and the measured average bird weight in those houses recovered 3.1 percent against the previous cycle.

Scenario 2: Generator and UPS plant rooms, Jakarta, Indonesia. A colocation operator in Jakarta runs nine diesel generators with UPS rooms in a compound where utility outages make the generators the primary supply most afternoons. The CO560 went into each generator hall and the transfer switch rooms, on the 4G LTE Cat-1 Modbus variant because the compound network is segmented away from facility systems by the IT security policy. The two relay stages drive the hall ventilation directly, with the stage one threshold tuned to 30 ppm after the first month showed technicians walking in during full load with the doors open. The platform log is now attached to the quarterly operations review, and the maintenance team found one generator with a cracked exhaust bellows from the ppm signature alone, before the annual load-bank test would have found it.

Scenario 3: Hostel network, Lisbon, Portugal. A hostel group operating seven buildings in the old city, with gas water heaters in narrow plant cupboards and guests in rooms three doors away, standardised on the CO210 for every sleeping room and the CO330 in each plant cupboard, so the compliance file covers both the guest rooms and the combustion sources. The Adhesive-mount installation suited the listed building fabric where drilling the tiled stairwells was refused by the heritage officer. The group operations manual now includes the monthly test-button round on a checklist, and the inspection file holds the per-unit placement photographs. In the first year, one water heater in the Alfama building produced a recurring evening plateau at 33 ppm that the cloud event history captured on eleven consecutive evenings before the service contractor accepted the repair order with the log attached.

Scenario 4: Rental portfolio compliance retrofit across 4,000 units, Manchester, United Kingdom. A housing association operating 4,000 units across Greater Manchester needed CO alarms in every room with a fixed combustion appliance before the audit window closed. The argument that decided the specification was not sensitivity but access: tenants remove batteries, and a swapped-out cell voids the compliance record at inspection. The WANLIN-CO210 sealed 10-year build has no battery door at all, so the checkout inspection photographs a single tamper-resistant housing. Gas Safe engineers fitted 4,000 units in 11 working days at roughly 6 minutes per room using the screwless twist plate, and the 433 MHz interconnect variant was used in the 900 flats where a hallway alarm and a boiler-cupboard alarm must sound together. The association logged two genuine incidents in the first winter, both cracked heat exchangers caught at the 50 ppm sustained stage rather than as ambulance calls.

Scenario 5: Ice-fishing cabin fleet, Manitoba, Canada. A cabin rental operator on Lake Winnipeg found that guests run propane heaters overnight in buildings tightened against minus 35 deg C, with the vent flue sometimes packed with snow. Battery alarms bought from a hardware chain died each February because alkaline cells freeze. The fleet standardised on the CO210 sealed lithium build, whose cell and electrochemical element are rated across the full operating window, mounted on the wall away from the direct heater plume per the EN 50292 placement logic. The voice announcement variant was chosen after a guest slept through a plain chirp at 3 a.m. during a blocked-flue event the previous season. Eighty cabins were equipped at 2 units per cabin, and the operator now photographs the green power LED as part of the between-guest turnover checklist.

Wanlin Competitive Advantages for Cross-Border Carbon Monoxide Alarm Buyers

The WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1 and the wider Wanlin carbon monoxide alarm programme deliver 10 distinct advantages for cross-border B2B buyers who source CO detection hardware directly from a Chinese manufacturer:

1. Source-factory pricing - Wanlin operates the SMT lines, the cell calibration benches and the CO test gas chambers, so FOB Shenzhen CO alarm pricing is 40-60% below Kidde, First Alert, BRK, X-Sense, Ei Electronics, Aico, FireAngel, Honeywell, Bosch or Siemens distribution prices for the same documented EN 50291 or UL 2034 scope.
2. Full type-test documentation - every CO alarm family ships with the EN 50291-1 and EN 50291-2 or UL 2034 test report reference, the declaration of conformity, the radio type-approval reference and the per-unit calibration record where applicable, removing the largest documentation blocker for importers and tender bidders.
3. One platform, many national conformity routes - CE and UKCA for Europe, UL 2034 and ULC for North America, INMETRO for Brazil, BIS for India, SIRIM for Malaysia, TISI for Thailand, SNI for Indonesia, DTI-BPS for the Philippines, NOM for Mexico, KC for Korea, SASO and SABER for Saudi Arabia, EAC for the Eurasian route, SABS for South Africa, CCCF for China and ActivFire for Australia, documented per SKU so the authority submittal and the approval review in each destination market complete in weeks rather than months.
4. Sealed 10-year build for portfolio owners - the WANLIN-CO210 has no battery door at all, which removes battery replacement labour, nuisance chirp complaints and the compliance gap after a tenant removes a cell, and presents a single tamper-resistant housing at every inspection photograph.
5. Two-stage industrial fan control - the WANLIN-CO560 reads the deck at bird or breathing height, drives ventilation at the 25 ppm stage, forces full extraction at the 200 ppm stage, and logs the ppm curve that proves the air quality case to the concession authority or the insurer.
6. Four radios on one mechanical platform - 433 MHz interconnect with no recurring fee for group alarms, LoRaWAN where hundreds of devices sit behind one gateway, NB-IoT or 4G LTE Cat-1 for dispersed single points and sites with no broadband at all, Wi-Fi only where IT approves it in writing, and RS485 Modbus RTU where the fan controller is the integration point, chosen per building with the lifetime connectivity cost quoted before commitment.
7. Placement engineering included - CO density tracks air, so EN 50292 placement logic follows airflow and the sleeper rather than a fixed height rule; our project documentation records per-unit placement photographs and the reasoning, which is exactly what acceptance inspections and insurance surveys ask for.
8. Project-specific ODM depth - housing artwork and colour, voice announcement languages for local markets, strobe and bed-shaker accessory integration for hearing-impaired occupants, marine gasketed builds for salt air, wide-temperature cells for winter storage and arctic camps, retailer-ready packaging, and Arabic, Spanish, Portuguese, Korean, Turkish, Polish, German, French or destination-language manuals, engineered from one factory.
9. Complete CO programme from one factory - sealed CO alarms, smart LCD CO alarms, industrial two-stage CO detectors, multi-parameter hazard nodes, combination-class detectors, sounder strobes, panels, gateways, gas detectors and the A119-YW test tool, all shipped together from one Shenzhen source with one set of declarations.
10. Warranty up to 60 months - 60 months for the sealed CO alarm and IoT detector families, 36 months for the industrial CO detector, panel and gateway families, 24 months for instrumentation and tester families, with free DOA replacement within 60 days.

Combined, these advantages allow Wanlin partners to win landlord compliance programmes, hotel and hostel standardisation, parking concession bids, caravan and marine factory-fit contracts, senior living and student housing rollouts, fuel forecourt and retail chain standards, and national distributor frameworks, secure regional distribution rights and serve end customers under their own brand at 40-60% lower landed cost compared to legacy western retail-chain channels.

Certifications, Standards Route and Market Access Compliance

The WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1 carries the following certifications as standard scope: EN 14604 / CE / RoHS / REACH / FCC Part 15 / GB 20517 CCCF / LoRaWAN Alliance certified radio. Optional add-on documentation available on request includes VdS (Germany), LPCB (United Kingdom), ETL and FM (global insurance), UL 2034 and ULC listing (North America), ActivFire (Australia), CNBOP-PIB (Poland), ATEX and IECEx for hazardous-area devices, KC (Korea), NOM (Mexico), SASO and SABER (Saudi Arabia), and radio type-approval reports per destination for the 433 MHz, LoRaWAN, NB-IoT, LTE and Wi-Fi models. All devices are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.

Cross-border buyers should note that CO alarm equipment sits across four compliance legs: the device standard such as EN 50291-1, EN 50291-2 or UL 2034, the radio type-approval for connected models in the destination band plan, the installation and placement practice such as EN 50292, NFPA 720 or the local gas safety rules where the device is documented as part of a building system, and the destination conformity route plus environmental declarations. Wanlin supplies a pre-validated compliance pack per model covering DoC templates, type-test references, radio approvals, calibration records and the annual self-test survey template, which typically moves importer approval from a quoted 8-14 weeks down to 2-4 weeks for most markets. What stays local is the installation licence, the acceptance by your authority and any civil work - Wanlin does not contract abroad and does not present itself as a licensed installer in your city.

Order Economics, MOQ, Lead Time and Logistics Math

For a typical first-time buyer ordering 5000 pieces of WANLIN-307 Wireless Interconnected Photoelectric Smoke Detector - LoRaWAN, NB-IoT and 4G LTE Cat-1, the economics stack is:

Sample order cost is USD 120 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term. L/C at sight is accepted for orders above USD 80,000. Production lead time is 18-25 days. Warranty is 60 months. Free DOA replacement within 60 days of receipt.

Carbon Monoxide Alarm FAQ - Standards, Placement, Power, Radios, False Alarms and Terms

Below are 8 frequently asked questions from overseas buyers, cross-border trading companies and regional distributors sourcing carbon monoxide alarms and CO detection hardware from China. Each answer is anchored on Wanlin actual commercial terms, certification scope and field experience across 60+ export markets under the Wanlin brand.

Should I buy EN 50291 or UL 2034 carbon monoxide alarms, and what is the difference?

Answer: EN 50291 is the European residential CO alarm standard and UL 2034 is the North American one, and the difference is mostly the time-weighted response envelope rather than the hardware. Both require the alarm to respond faster as concentration rises: roughly 50 ppm within 60-90 minutes, 100 ppm within 10-40 minutes and 300 ppm within 3 minutes in EN 50291-1, with UL 2034 in the same family of time limits. The CO210 and CO330 families are engineered against the EN 50291-1 envelope as standard scope with UL 2034 documentation available as an add-on scope, so the same platform serves both routes. What you must not do is ship the wrong documentation for the destination: the declaration of conformity, the type-test report and the radio type-approval for wireless models all travel per SKU and per shipment. Our engineers confirm the destination market and the applicable scheme before quoting, because that answer decides the documentation pack and sometimes the housing or marking variant.

Where should a carbon monoxide alarm be mounted, and does height matter like it does for smoke?

Answer: CO has almost the same density as air at room temperature, so it neither pools at the floor like LPG nor rises straight to the ceiling like hot smoke, and placement follows airflow and the appliance rather than a fixed height rule. EN 50292 practice puts the alarm at breathing height in the same room as the appliance, on a wall rather than cramped in a corner, away from windows, vents and dead-air spaces, and in rooms where people sleep when the appliance serves those rooms. In practice our project teams mount at 1.5 m on the wall in the appliance room, mid-wall in corridors, and at breathing height in sleeping rooms, and we document the placement photographs per unit because the acceptance inspection asks for them. In boats, caravans and small cabins the same logic holds: read the average concentration where the sleeper breathes, not a pocket near the exhaust.

Sealed 10-year battery, replaceable battery or mains power, which should a portfolio owner choose?

Answer: The sealed build wins almost every landlord and operator argument, and the reasoning is operational rather than electrical. Replaceable-cell alarms generate three recurring costs: battery replacement labour or shipping, nuisance chirps that arrive as complaints at unsociable hours, and the compliance gap in the window after a tenant removes a cell. The CO210 sealed 10-year build has no battery door, presents a single tamper-resistant housing at inspection, and removes the entire battery line from the maintenance budget. Mains-powered units like the CO330 suit plant rooms and commercial sites where wiring exists and a display adds value, and the sealed backup cell keeps full alarm function through outages. We quote both with the 10-year total cost side by side, and in our experience the sealed build is cheaper from year three onward once service visits are counted.

Which radio should a connected CO deployment use, and who pays the recurring cost?

Answer: The radio is chosen per building, not per project. Wi-Fi suits sites with an approved guest or IoT VLAN and no recurring fee, and it is the fastest to commission. NB-IoT suits dispersed single points like plant cupboards with no local network, with the lowest power draw and years of battery life. 4G LTE Cat-1 suits sites with no broadband at all, such as generator compounds and remote camps, with the widest roaming. LoRaWAN suits dense campus rollouts where hundreds of devices sit behind one gateway, and the RS485 Modbus wired build on the CO560 suits parking decks and tunnels where the fan controller integration is the point and cabling already runs. The recurring cost question decides more of these choices than the radio specification, so we quote every option with its lifetime connectivity cost before you commit, including the on-premise-only route where policy demands no cloud dependency at all.

How do you handle false alarms and cross-sensitivity, especially hydrogen from charging rooms?

Answer: Electrochemical CO cells cross-react with hydrogen, and a CO alarm mounted beside a lead-acid charging bank will read the hydrogen as CO, which is why placement guidance excludes charging rooms and battery halls from standard CO alarm positions. The CO210 and CO330 cells carry a hydrogen cross-sensitivity compensation circuit, and the CO560 industrial build offers the placement separation plus threshold staging that a parking deck or plant room needs. Solvent and silicone vapours during building works are the other classic nuisance source, and the documented answer is the same for every fleet we ship: thresholds are confirmed remotely and logged, the ppm trend is the evidence for every adjustment, and the first month of real data tunes the site profile before the handover signature. An alarm that nuisance-trips destroys trust faster than one that is slightly late, so the tuning month is part of the standard project scope, not an optional extra.

Combination smoke and CO alarm, or separate devices, and why does it matter for tenders?

Answer: Combination devices like the WANLIN-303 family reduce ceiling clutter and cost per protected room, and they are the right answer for bedrooms, hallways and rental units where the procurement argument is coverage per dollar. Separate devices win where the smoke and CO risks live in different rooms, where the maintenance replacement cycles differ, or where the tender specification names both device classes separately, which is common in public procurement. There is also a lifecycle argument: a CO cell reaches end of life on its own 10-year clock even when the smoke chamber is still healthy, and in a combination unit that retires the whole device, while separate units retire independently. We publish both routes with the same documentation scope and let the placement plan decide, because the correct answer is a room-by-room decision rather than a project-wide one.

What certification scope ships with the equipment, and what stays local?

Answer: Standard scope per SKU is EN 50291-1 and EN 50291-2 documentation with CE, RoHS and REACH declarations, radio type-approval for the wireless variants, GB 15322 CCCF references for the China scheme, and UL 2034 documentation as an add-on scope for North American destinations. Factory scope is ISO 9001 and ISO 14001 with RoHS and REACH declarations per batch. Destination-specific documentation such as UKCA, SASO and SABER, EAC, BIS, SIRIM, TISI, SNI, DTI-BPS, NOM, INMETRO and KC is prepared per destination and per shipment, and the NIST-traceable calibration certificate ships per unit on the CO560 industrial family. What stays local is installation licensing, authority acceptance and any civil work: Wanlin does not contract abroad and does not present itself as a licensed installer in your country, and we say so plainly rather than leave the impression otherwise.

What are the MOQ, lead time, sample and payment terms for a first order?

Answer: MOQ ranges from 200 pieces on the industrial CO560 family and 300 on the smart CO330 to 1,000 pieces on the high-volume sealed CO210, with mixed-SKU containers accepted on a first order. Standard lead time is 15-28 days depending on model and certification scope. Samples ship in 3-7 days by express for stock SKUs and 7-15 days for special configurations, with sample cost refundable against the first bulk order above MOQ. Standard terms are 30 percent T/T deposit with the balance against bill of lading copy, and L/C at sight is accepted above USD 80,000. Three partnership tiers exist, Authorized Reseller, Regional Distributor and Strategic OEM, each with documented annual volume, discount, exclusivity and joint marketing terms rather than negotiated case by case.

Wanlin Global Partner Stories - Real CO Alarm Project References across 60+ Markets

Wanlin carbon monoxide alarm programmes have shipped to 60+ markets across 6 continents, with the United Kingdom, the United States, Germany, Australia, Spain, Indonesia, Nigeria, Saudi Arabia, Poland, Canada, Chile, Japan, Qatar, Portugal, France, Turkiye, South Africa, Thailand, the Philippines, Colombia, Hungary and the United Arab Emirates among the most active sourcing routes. Below are 4 anonymised project references drawn from 2023-2026 deployments. Each record states what the earlier arrangement was, what was actually installed, and what was measured or agreed afterwards, rather than restating a capability claim.

Case 1: Jakarta colocation operator logs generator halls on 4G Modbus. A colocation operator in Jakarta equipped nine generator halls and the transfer switch rooms with the WANLIN-CO560 4G LTE Cat-1 Modbus variant, after the IT security policy segmented the facility network away from plant monitoring. The two relay stages drive the hall ventilation directly, tuned to a 30 ppm stage one after the first month of data showed technician entry during full load. The platform log attaches to the quarterly operations review. In the first year the ppm signature alone identified one generator with a cracked exhaust bellows, repaired before the annual load-bank test would have found it, at roughly a fifth of the cost of an in-service failure on a site where utility outages make the generators the primary afternoon supply.

Case 2: Monterrey fuel retailer rolls CO alarms into forecourt shop standard. A fuel retailer in Monterrey running 220 forecourt convenience stores made the WANLIN-CO210 a store standard after a regional corporate programme mandated CO detection wherever gas water heaters serve staff kitchens. The rollout covered 220 stores at 2 units per store, phased across 8 weeks with the own maintenance contractor reading the self-test LED status during existing store visits. The sealed build removed the battery replacement line item from the store maintenance budget. The programme documentation pack included the UL 2034 report reference and the per-unit placement photographs, and the corporate audit now records the alarm in the store safety checklist nationwide.

Case 3: Melbourne senior living operator standardises voice CO alarms in 26 facilities. A senior living operator in Melbourne standardised the WANLIN-CO210 voice announcement build across 26 facilities after a resident wellbeing review found plain tone alarms were being slept through in memory care wings. The programme covered 3,400 units including the strobe accessory on corridor positions for night staff. The installation ran facility by facility over 11 weeks with zero service interruptions, using the twist plates and adhesive mounts to avoid drilling in the care environments. The first year of operation logged a corroded draft hood in one laundry plant room caught at sustained 30 ppm during the 6 a.m. load, and the operator now includes the alarm self-test in the facility manager monthly audit app.

Case 4: Bogota laundry franchise fixes a recurring technician dispute with data. A laundry franchise in Bogota operating 48 branches with gas dryers had a running dispute with the equipment contractor about whether branch CO levels were a ventilation problem or a dryer tuning problem. The franchise fitted the WANLIN-CO330 in each plant room, with the cloud platform holding the ppm curve per branch. The data settled the dispute within a month: 9 branches showed clean combustion with adequate ventilation, and 11 showed the repeating morning plateau signature of dryers running rich, which the contractor retuned under warranty with the log attached. The remaining branches showed door-closed ventilation failures during peak hours, fixed with extractor scheduling. The franchise now attaches the monthly ppm export to the contractor service level review.

Partnership Models - Project Supply, Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers 3 partnership tiers for cross-border carbon monoxide alarm buyers, landlord portfolio operators, parking and facility operators, contractors and overseas cooperation partners:

All partners receive: free firmware updates for life of product, free DOA replacement within 60 days, dedicated account manager and response within 4 business hours, free certification documentation and test report copies, destination-language manual support, placement engineering guidance per project, integration assistance including MQTT topic structure and Modbus register maps for partners running their own servers, and one joint trade-show booth per year at Intersec Dubai, Security Essen, NFPA Conference, Firex International, Secutech, SICUR, FeuerTrutz, FireExpo or Canton Fair on a cost-share basis.

Conclusion - How to Start Your Carbon Monoxide Alarm Sourcing Today

Wanlin Group 2026 carbon monoxide alarm export program is now open for global B2B buyers, regional distributors, housing associations and letting agents, senior living and student housing operators, hotel and hostel chains, parking and tunnel operators, marina and caravan dealers, HVAC contractors, facility management contractors, insurers, cross-border trading companies and OEM and ODM partners across 60+ destination markets. To initiate a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, please contact our export team via the channels below. Sample orders ship within 3-7 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 18-25 days. Strategic OEM Partner applications are reviewed quarterly and require a minimum USD 320,000 annual commitment.

We sincerely invite global safety equipment buyers, national importers, tender bidders, landlord portfolio managers, hotel and resort groups, parking and tunnel operators, marina, caravan and RV manufacturers, senior living and student housing operators, fuel forecourt and retail chains, system integrators and cross-border trading companies to engage in long-term cooperation with Wanlin Group as your China-based OEM and ODM partner, regional exclusive distributor or strategic global supplier under the Wanlin brand. Wanlin is the Chinese source factory behind 60+ country CO detection programmes, the SMT lines, cell calibration benches and CO test gas chambers behind every batch, and this 12-section export program. Let us protect every sleeper together.

Article signature:

working_principle: Photoelectric light-scattering detection with a dual-wavelength chamber, stray-light rejection and a supervised radio stack with confirmed uplinks
sensing_element: Dual infrared plus blue LED optical chamber with drift compensation, temperature-compensated gain and a sealed labyrinth
alarm_threshold: 0.08-0.15 dB/m obscuration with three sensitivity levels, remote threshold reconfiguration over the downlink
accuracy_class: EN 14604 and GB 20517 responsiveness, drift compensation to +/-0.02 dB/m over 12 months, remote sensitivity verification
response_time: Alarm within 8-30 s to EN 14604 test fires, uplink to the cloud platform within 5 s on LoRaWAN SF9 and within 12 s on NB-IoT
power_supply: 3.6V ER18505M lithium thionyl chloride cell, 5-year service life at 12 uplinks per day, field-replaceable
power_consumption: 12 uA standby, 120 mA peak transmit, 32 mA in alarm
output_signal: LoRaWAN 1.0.3 Class A uplink at SF7-SF12 on 433 / 470 / 868 / 915 MHz, with NB-IoT CoAP and 4G LTE Cat-1 MQTT variants per SKU
coverage_area: Up to 80 m2 at 6 m mounting height per EN 14604, 60 m2 in high-airflow corridors
alarm_output: Integral 85 dB(A) at 3 m sounder plus platform push notification, SMS and voice call through the connected gateway
ip_rating: IP40 indoor standard, IP54 with the gasket accessory for kitchens and plant rooms
operating_temp: -10 deg C to +55 deg C
humidity_range: 10-95% RH non-condensing
housing_material: Flame-retardant ABS V-0 housing, UV-stabilised white finish, twist-lock base with tamper release
dimensions_weight: 104 mm diameter x 48 mm height, 168 g net including the cell
certifications: EN 14604 / CE / RoHS / REACH / FCC Part 15 / GB 20517 CCCF / LoRaWAN Alliance certified radio

• Author: Wanlin Group Fire Detection Division Export Engineering Team
• Published: 2026-09-22 16:19
• Data sources: Wanlin Group 2026 carbon monoxide alarm export programme documentation, electrochemical cell calibration records per production lot, EN 50291-1 and EN 50291-2 type-test references, UL 2034 documentation scope, radio type-approval records for the 433 MHz, LoRaWAN, NB-IoT, LTE and Wi-Fi models, ppm trend and false-alarm statistics from deployed landlord, hotel, parking, marine and plant-room sites, integration records covering Modbus, BACnet IP, MQTT and fan-control deployments, installation and self-test logs from partner projects, RoHS, REACH and WEEE declarations.
• Shenzhen HQ: Wanlin Group (Wanlin Fire Detection Division), Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China


• Reference: www.wanlinfire.com / WANLIN-307 / EN 50291-1 / EN 50291-2 / EN 50292 / UL 2034 / UL 2075 / NFPA 720 / NFPA 72 / GB 15322 / EN 50194 / EN 54 / RoHS REACH WEEE
• Contact: Email wanlinfirecontrol@163.com | Phone +8613261677119 | Website https://www.wanlinfire.com